Beschreibung


NEWS, WIP (work in process) AND PICTURES FROM MY LATEST KNIFE CREATIONS!

7/29/2011

Glow Pins Mini Skirmish - Finished Pics

A well known config and with those pics i'm very happy! I always try to
shoot pics were the knife looks líke it is and not over-processed with any
software! ;-)





Specs:

- frame is thick .125 titanium on one side, stonewashed, two tone anodizing blue
- Non lock side is .050 Ti liner, carbon fiber onlay
- Mosaic Center Pin, 5 handmade glow pins
- special clip, stonewashed, two tone anodizing blue (clip is the whole knife shape in miniature)
- Titanium Skullcrusher backspacer,stonewashed, two tone anodizing blue
- heatcolored hardware, custom pivot pin
- 154CPM blade, handrubbed (satin) finish
- OAL 8"
- blade 3.5"
- closed 4 5/8"
- blade thickness .154

7/28/2011

Black G10 Mini Skirmish - Finished Pics

Here's a basic one with a touch of bling...........






Specs:
- frame is thick .125 titanium on one side, stonewashed
- Non lock side is .050 Ti liner, black G10 onlay
- Mosaic Center Pin
- special clip, stonewashed (clip is the whole knife shape in miniature)
- Titanium backspacer
- stainnless hardware, custom pivot pin
- S30V blade, stonewashed
- OAL 8"
- blade 3.5"
- closed 4 5/8"
- blade thickness .154

Damascus Mini Ninja - Finished Pics

All finished If someone would like it, make me an offer, via email!

Specs:
- Todd Fischer carbon damascus 
- .200 thick
- 6.100 OAL
- 2.5 Blade


7/27/2011

Damascus Mini Ninja - WIP #3 Pics

Out of the Acid - it's a cool little cutter though!


Damascus Mini Ninja - WIP #2 Pics

Being so thick it took some different grindin!!! It's in the acid now!

Damascus Mini Ninja - WIP Pics

So I've had this stout little damascus blank laying here for a long time........
Time to finish it up!!! :-)



7/16/2011

Mammoth Ivory Inlay Mini Skirmish - Finished Pics

It's ready to go!!!





Specs:

- frame is thick .125 titanium on both sides, stonewashed, anodizing gold
- Mammoth ivory inlay
- special clip, orange peeled, anodizing gold (clip is the whole knife shape in miniature)
- Skullcrusher Ti backspacer, stonewashed, anodizing gold, shiny
- heatcolored hardware, custom pivot pin
- 154CPM blade, handrubbed satin finish
- OAL 8"
- blade 3.5"
- closed 4 5/8"
- blade thickness .154

Mammoth Ivory Inlay Mini Skirmish - WIP Pics #4

Here's the blade, all rubbed, sharpened and ready to go into the frame. I don't put the edge on my blades while they're in the frame. If I hit the frame with the belt, I'm screwed and all that dust goes into the pivot. The frames in the background just happened to be laying there! :-)


While the frames are in the tumbler, I finshed up the backspacer. It's been LONG time since I did one shiny but I think it will add a little bling to balance out that mammoth ivory. Again, please ignore the product placement in the background. :-)




The hardware, toasted a nice golden brown.....


7/15/2011

Mammoth Ivory Inlay Mini Skirmish - WIP Pics #3

Lock set, now the easy and fun part starts. Melting, finishing, rubbing and making the inlay all pretty!


It's all ready to finish at this point. The pocket clip has been melted, inlay finished. All the hard work is done. The flash makes everything looks scratchy but it's very smooth.




Mammoth Ivory Inlay Mini Skirmish - WIP Pics #2

OK, it doesn't look like I've done much more to the frame.........but I have. All the holes counterbored, pivot reamed, backspacer milled to thickness, stop pin made, pivot made, pivot screw prepped and the inlay holes drilled and tapped. I also took some BEFORE pics of the pocket clip. It gets a lot of work which will be next.

When I finish the pocket clip, I'll also melt the frame and backspacer.

I'm making this one ass backwards as I usually grind the blade last. Today, I wanted to see what it would look like so I did it first. I like to finish the frame almost all the way before I set the lock. That's next as well.

If all the components are prepped correctly, the blade will always be centered when assembled. I like when they just fall into place, dead center without any problems upon the first assembley. Then I know that it will do the same thing during final assembley.




Horn/ Mammoth Ivory Inlay Mini Skirmish - WIP Pics

One with horn or mammoth ivory inlay - your choice for those are on my email list. :-)

The blade is ready to finish. I hand ground the top edge instead of doing it on my block fixture. It's much deeper and more pronounced. The main grind is also done. I'm moving on to the frame. Once that's all prepped, I'll stonewash everything at once.



7/13/2011

CF Double Inlay Mini Skirmish - Finished Pics

Next double inlay MS with Carbonfiber and an onlay of jade G10 and a new design on the non lock side, the shadow inlays! ;-)






Specs:

- frame is thick .125 titanium on one side, SHADOW INLAYS,  stonewashed, anodizing blue
- Non lock side is .050 Ti liner, jade G10 onlay
- Carbonfiber double inlay
- middle Mosaic Pin as an eyecatcher
- special clip, stonewashed, anodizing blue (clip is the whole knife shape in miniature)
- Skullcrusher Ti backspacer, stonewashed, anodizing blue
- stainless hardware, custom pivot pin
- 154CPM blade, handrubbed satin finish
- OAL 8"
- blade 3.5"
- closed 4 5/8"
- blade thickness .154

7/08/2011

Double Inlay Mini Skirmish - Finished Pics

It's dun!!! :-))))









Specs:


- frame is thick .187 titanium on BOTH sides, stonewashed, anodizing blue
- double inlay on both sides, silver twill G10 and Carbonfiber
- middle Mosaic Pin as an eyecatcher
- special clip, stonewashed, anodizing blue (clip is the whole knife shape in miniature)
- Skullcrusher jade G10 backspacer
- heatcolored hardware, custom pivot pin
- 154CPM blade, two tone finish,  handrubbed satin flats/stonewashed grind
- OAL 8"
- blade 3.5"
- closed 4 5/8"
- blade thickness .154

7/07/2011

Double Inlay Mini Skirmish - #2 WIP Pics

The first Mini Skirmish with a double inlay is nearly done. I added also a nice mosaic pin as an eyecatcher! Just a few detail work to do, stay sharp for the finushed pics! :-)