Mulligan Mini Skirmish - ONE OF - Finished Pics

This is a Mini Skirmish "Mulligan" Some might remember the full size Skirmish Mulligan i made a few years ago. Basically they are made from a blade that ended up too short. What I do is shorten it even more and cut the back of the frame to compensate. This is the FIRST Mini Skirmish Mulligan, it might be the last unless I end up with another short blade The stock blade size is just a hair under 3 1/2" the blade on this one is just a hair over 3". The standard Mini is about 8" OAL, the Mulligan is just over 7 3/8"......Quite a "chop" They blade is much more "stubby" in person than in the pics but it still has a really good blade to handle ratio.



Like the Mini Skirmish, it's built like a tank with a 1/4" pivot, the Mulligan has two 6-32 frame screws with Ti spacers. It locks like a bank vault with a very strong detent. The pocket clip is from a Button lock Henchman. It's mounted so the knife will carry deep in the pocket. The blade is stonewashed S30V.

Comparison pics to a normal sized Mini Skirmish