Mulligan Mini Skirmish - ONE OF - Finished Pics

This is a Mini Skirmish "Mulligan" Some might remember the full size Skirmish Mulligan i made a few years ago. Basically they are made from a blade that ended up too short. What I do is shorten it even more and cut the back of the frame to compensate. This is the FIRST Mini Skirmish Mulligan, it might be the last unless I end up with another short blade The stock blade size is just a hair under 3 1/2" the blade on this one is just a hair over 3". The standard Mini is about 8" OAL, the Mulligan is just over 7 3/8"......Quite a "chop" They blade is much more "stubby" in person than in the pics but it still has a really good blade to handle ratio.



Like the Mini Skirmish, it's built like a tank with a 1/4" pivot, the Mulligan has two 6-32 frame screws with Ti spacers. It locks like a bank vault with a very strong detent. The pocket clip is from a Button lock Henchman. It's mounted so the knife will carry deep in the pocket. The blade is stonewashed S30V.

Comparison pics to a normal sized Mini Skirmish

Superconductor Inlay Mini Skirmish - Finished Pics

 A new Mini Skirmish with an special inlay is ready. This time i used Supercondutor for the inlay and the backspacer as well. The backspacer is also in a new style, i call it the smooth one!

Specs:

- frame is thick .187 titanium on BOTH sides, stonewashed, anodizing bronze
- Superconductor inlay
- special clip, stonewashed, anodizing bronze (clip is the whole knife shape in miniature)
- 1st Smooth backspacer, Superconductor
- heatcoloured hardware, custom pivot pin
- 154CPM blade, handrubbed satin finish
- OAL 8"
- blade 3.5"
- closed 4 5/8"
- blade thickness .154

NEW WIP PICS OF MINI SKIRMISH'S #2

Here's some progress pics. The one with the mast ivory inlay is looking for a home It's got a nice blade grind that will be hand rubbed. Email me for more info.

Groovy User Grade Mini Skirmish- Finished Pics

Another Groovy User Grade Mini Skirm on it's way to his new owner! The user grade is my finish for
a hard use and long knife life. The stonewashed finish is very scratch resistible.

USER GRADE Mini Skirmish Specs:


- framelock with grooves, .125 titanium on BOTH sides, stonewashed,
- special clip, stonewashed (clip is the whole knife shape in miniature
- Ti backspacer in hump design, stonewashed
- stainless hardware, custom pivot pin
- S30V blade, two tone, hand ground/stonewashed
- OAL 8"
- blade 3.5"
- closed 4 5/8"
- blade thickness .154

NEW WIP PICS OF MINI SKIRMISH'S

currently are four in the work...